61
ALI-TP7112RH PTZ Outdoor Camera User Manual
SECTION 5: OSD MENU REFERENCE
•
485 CHECK
: You can set this option to ON or AUTO to improve the PTZ/OSD controls response.
ON
: detects the protocol,
address and baud rate all the time. It will display error info when information is not correct or the device has an error.
AUTO
: it
will stop detecting once the correct info has been detected.
•
MEMORY TIME
:
•
COAXIAL CONTROL
: Enable/Disable the Up to Coax function. I.E., both the video stream and control signals are passed
through the coax. PELCO-C and AUTO are protocol).
•
PROTOCOL - C
: Used for controlling the camera through COAX using RS-485 features.
To change a parameter value:
2.
Use the
p
and
q
buttons to move the position icon to the parameter you want to change, and then click
Iris+
. The
position icon will change to a .
NOTE
: If the position icon is before SYSTEM TIME or DISPLAY SETTINGS, a submenu will
open. See below.
3.
Use the
p
and
q
buttons to show the parameter to what you prefer.
4.
Click
Iris+
again to change the parameter. The position icon will change to either a , or
.
5.
Repeat steps
1
through
3
above to change other parameters, as needed.
Setting SYSTEM TIME
1.
Open the
SYSTEM TIME
submenu from the OSD
MAIN MENUS | DOME SETTINGS | SYSTEM SETTINGS
menu.
2.
On SYSTEM SETTINGS page 1, move the position icon to SYSTEM TIME, and then click
Iris+
. A time setting window will
open. The display shows the current year, month, day (Y - M - D) and hour, minute and second (H - M - S) in two-digit
format.
3.
Use the
p
and
q
buttons to change the first two digits if needed, and then click the
u
button to advance the cursor to
the next field, and change it as needed using the
p
and
q
buttons.
4.
Repeat the previous step until the current date and time is shown, and then click
Iris+
to save the settings and return to the
SYSTEM SETTINGS
menu.
