60
SECTION 5: OSD MENU REFERENCE
SYSTEM SETTINGS page 3
Parameters include:
Page 1:
•
SET SOFT ADDR
: If the
SET SOFT ADDR
is set ON, the soft address is the valid address for connecting the camera. The
SOFT
ADDRESS
ranges from 1 to 255. If the
SET SOFT ADDR
is set as OFF, the hard address set by the DIP switch is the valid address
of the camera.
•
SOFT BAUDRATE
: You can select either 2400, 4800, 9600 or 19200. If the
SET SOFT BAUD
is set to OFF, the baud rate is set
by the hardware DIP switches.
•
SET SOFT BAUD
: If the
SET SOFT BAUD
is set to ON,
SOFT BAUDRATE
is the valid baud rate for the camera. You can select
either 2400, 4800, 9600 or 19200. If the
SET SOFT BAUD
is set to OFF, the baud rate is set by the hardware DIP switches.
•
BROADCAST ADDRESS
: When the
BROADCAST ADDRESS
is set to ON, the control devices with address 0 can control the
camera remotely regardless of the address of the camera. This function is usually used for debugging.
•
PELCO CHECKSUM
: If the camera uses PELCO-P or PELCO-D protocol, you can set the PELCO CHECKSUM to ON to improve the
video quality.
•
SYSTEM TIME
: Opens the system time setting display. In this display, you can set the date and time. See "4.6.1 Setting
SYSTEM TIME" on page 32.
Page 2:
•
ANGLE ZERO
: Set this parameter when the camera is pointed directly north (or consider north). If the P/T ANGLE display
parameter is ON, the camera direction (N, NE, E, SE, etc.) is displayed in the Live View window.
•
DISPLAY SETTINGS
: You can enable or disable the on-screen display of PTZ movements, alarms, time, presets, zone, address,
error rate, and fan/heat show, etc. See "4.6.2 Configuring DISPLAY SETTINGS" on page 33. .
•
HEAT CONTROL
: You can set the internal
HEAT CONTROL
to TEMP (controlled by temperature), ON or OFF.
•
FAN CONTROL
: You can set the internal
FAN CONTROL
to TEMP (controlled by temperature), ON or OFF.
•
EIS
(Electronic Image Stabilization)
SETTINGS
: Select either ON or OFF for this feature. See EIS LEVEL below.
•
EIS LEVEL
: The EIS level can be set from 0 .. 3 as needed.
•
PRESET FOCUS
(direct focus): You can set the preset direct focus function to ON or OFF.
Page 3:
•
PROTOCOL STATUS
: Set PROTOCOL STATUS to ON to enable a user-defined protocol.
•
PROTOCOL
: You can set this option to AUTO MATCH (self adaptive), PELCO-P, PELCO-D, or ALIBI-C.
