ALGE-Timing Timy SPEED, Руководство пользователя, Страница: 7 / 9

Timy SPEED
Page 7
4 Ballspeed
5 Construction of the system
The Ballspeed-System consists of several single components, which must be screwed to-
gether first.

2 U-tracks with gum-feets and star handle screw for mounting of the photocells

1 reflector for RLS1

1 reflector for RLS3

1 sheet plate for RLS3

1 RLS1n without reflector, bracket BBG and cable

1 RLS3c without reflector, tripods and cables

1 Timy XE

cable 160—2 Timy RLS extension

cable 001-10, 002-10 and 206-10

standard-GAZ 315 PP4
Important:
Connect green cable to PR1a and red cable to RLS3c.
The Timy can work without batteries, since he will be supplied by cable 206-10, which is
connected to the display board.
Please pay attention that the accumulators of the display board are fully loaded before the
event starts.
The two U-sheet plates must have at least a distance of 1m between each other therewith
the photocells will work.
But we always recommend a bigger distance between them to avoid possibly damages of
the system by accidentally missing.
It´s necessary to adjust the right distance of 1m on the Timy. This is the distance between
the two photocells.