ALGE-Timing Timy SPEED, Руководство пользователя, Страница: 4 / 9

Timy SPEED
Page 4
1 Keypad and general operation
Please see Timy manual „GENERAL“.
2 Description of display indication
Description of settings:

Startnumber and startnumber-automatic

Measured speed

Adjusted distance

Speed unity

Measuring-direction
If the start-photocell is triggered out, the display will show instead of “0.00” a dotted line.
Timy will calculate from the adjusted distance and min. speed, how long one cycle will take at
maximum. If this time will be crossed, the display will show “0.00” and is ready for the next
measurement.
2.1 Startnumber and STN-automatic
Here you can adjust the requested start number. You should always confirm it with one of the
“OK” buttons. You can use the same startnumber for several times.
The startnumber-automatic can be adjusted at “Main menue”, “General”, “STN-automatic”.
Arrow upward means that the startnumber will increase for one number.
Arrow downward means that the startnumber will decrease for one number.
If no arrow is visible then the automatic is deactivated.
2.2 Adjustments in subprogram SPEED
Here you can adjust and change several setting which will also be indicated at the display
Push the button . Push the buttons or as long as you will see menue point
„SPEED“. You can make adjustments at the following points:

distance

direction

unity

min. speed

max. speed

Horn Level

Meas-Points

print times
2.2.1 Distance
Here you should indicate the distance in meter to the mounted photocell before.
Input of distances with 0.1 meter accuracy is possible.
The larger the distance between the photocells, the more accurate the measurement.
Confirm the indicated distance with one of the two „OK“-buttons.