ALGE-Timing Timy 3, Руководство пользователя

Страница: 5 / 8

Manual
TIMY3 – Jumping
Page 5
2 General
The program jumping is a program to execute certain training tests with jumping. For this test
you need a contact mat (e.g.
ALGE-TIMING
contact mat CM40x30 (see below)). We can also
offer bigger contact mats on request.
The time from leaving the mat until landing on the mat is measured by the timing device
TIMY3. From the measured “time in the air”, the timing device is calculating the height of the
jump.
3 Select Program Jumping
The TIMY3 program "JUMPING" measures the height of the jump when using a contact mat.
The contact mat is connected to channel 0 (C0) at the TIMY3.
1. Connect the contact mat to the TIMY3 (channel C0)
2. Start the TIMY3 and select program Jumping
3. Select the jumping mode with the function key <F0>, <F1>, <F2>, <F3>
3.a. <F0> select further jumping modes
3.b. <F1> <F2> <F3> : select the mode that is specified above it
4 Jumping Modes
You can select between the following jumping modes:
•
squat
•
count
•
drop
•
pow15
•
pow30
•
pow60
4.1 Squat Jump
The squat jump is used in sports science for jump analysis to test the pure concentric force of
the jump ability of muscles (a backswing is not allowed).