Manual
TdC 8001
-19-
3 Timing
3.1 Turn on TdC 8001
3.1.1 First Heat
−
Turn on TdC 8001 with switch (g) (language settings see chapter 0)
−
Info display shows the following:
ALGE-TIMING
Company
TdC 8001
Device
DEU V02.B1
Language and current version
−
After a few seconds the program used last is shown.
Program 1: SPLIT
Program
Select: YES/NO or Program number: 0#
possible selections
−
Select shown program with <YES> or <ENTER>. For selection of another program enter pro-
gram number or select with <NO> and cursor keys any program.
−
Info display (7) shows the currently occupied disk space (see chapter 2.5)
Clear race:
1345/ 8654 R1 <
F1
0/ 8654 R2
F2
1250/ 6283 R3
F3
Continue: ENTER
534/ 6283 R4
F4
−
Four separate races can be stored (R1, R2, R3 and R4). It is shown how many disk spaces are
occupied (first number) and how many are vacant (second number).
−
By pressing one of the F-keys 1-4 the races that are to be cleared can be indicated (arrow at
the end of the line).
−
Clear selected races with <ENTER>.
−
Select race:
Select race:
0/ 9999 R1 <
F1
0/ 9999 R2
F2
1250/ 6283 R3
F3
Continue: ENTER
534/ 6283 R4
F4
−
Select race with one of the F-keys 1-4 and confirm with <ENTER>.
−
When the selected race is clear, you must select the precision:
Select precision:
1 s
F1 precision: seconds
1/10 s
F2 precision:
1
10
�
seconds
1/100 s <
F3 precision:
1
100
�
seconds
Continue: ENTER
1/1000 s
F4 precision:
1
1000
�
seconds
−
The precision sets what precision is displayed. It only applies to calculate times (run time, inter-
mediate time, etx.) not for time of days.
−
The precision is selected with one of the F-keys 1-4. The last used precision is suggested.
−
Confirm precision with <ENTER>.
−
After the precision the timing mode has to be selected:
Содержание TDC8001
