Manual
ASC3
Page 12
2.2.7
Select the Brightness of the LED <brIgHt>
The startclock has 10 brightness levels for the LED.
During breaks (e.g. between two runs for alpine ski-
ing) you should save battery power by setting level
off.
off .... LED off (power saving)
0 ...... LED lowest level
5 ...... LED medium level
9 ...... LED highest level
If you select level off (power saving), the startclock does not show anything on the
front face and also stops the acoustic output (sound off).
a) Internal push buttons:
•
Press the yellow push button PB2 (2) for 6 seconds until the display (F)
shows <brIGHT>.
•
Set the brightness with the green push button PB1 (1).
•
Confirm the selected value with the yellow push button PB2 (2).
b) Remote Control ASC3-RC:
•
Press the button
for about 7 seconds until it shows
<brIGHT>
•
Select the brightness level by pressing the button
until it
shows the correct brightness.
•
Wait for four seconds and it changes
c) External push button connected at red/black banana socket (4):
•
Press the push button for six seconds until display (F) shows
<brigHT>.
•
Set the brightness by pushing the button.
•
Confirm the selected brightness by pressing the button until the dis-
play (F) shows the time of day.
Содержание ASC3
Страница 1: ...Manual Version E140514 ...
Страница 39: ...Manual ASC3 Page 39 ...