WARNING !
Before use, and before installing this
fi
xture, read carefully user manual, and follow the safety precautions
listed on this page.
WARNING !
Very high level light output. DO NOT LOOK INTO THE BEAM.
DANGER !
Hazardous voltage, Risk of electric shock!
ALWAYS disconnect the
fi
xture from power for servicing, for cleaning or installing. Do not connect this unit on
a dimmer power pack.
Protect the unit from rain or moisture.
WARNING !
Burn Hazard. Do not touch. Very hot surface.
The
fi
xture becomes hot during use and remains hot 10 min after use. Do not touch the unit.
WARNING !
Fire Hazard!
Keep
flam
mable materials away from the
fi
xture. Do not operate the
fi
xture with ambient temperature over
4O°C.
DANGER !
Safety Hazard. Risk of injury.
This unit must be installed by professional people. If suspended, make sure the structure and the hardware
used for this suspension is secured. This Hardware must support at least 10 times the weight of the device
suspended.
Ensure public is not looking at the beam. Do not try to repair the
fi
xture by yourself. Contact a professional
repair service.
Thank you for choosing one of our
Algam Lighting
product. Please read this user manual carefully and follow
the instructions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future
reference.
SAFETY INSTRUCTIONS
The symbols shown above are internationally accepted symbols that warn
of potential hazards with electrical products.
if one of those symbols is on your product , please read carrefully the following:
m
0.5
Locate the fixture in a well ventillated spot, away from flammable materials.
The fixture must be fixed at least 50cm from surrouding walls .
