Product User’s Notice
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means, except
documentation kept by the purchaser for archiving purposes, without the
express permission of Alf Electro-Technical Services CC (ALFTECH).
ALFTECH provides this manual "as is" without a warranty of any kind,
either expressed or implied, including but not limited to the implied
warranties or conditions of merchantability or fitness for a particular
application or purpose. In no event shall ALFTECH, its members,
officers, employees and agents, or its suppliers be liable for any
damages whatsoever (including, without limitation, damages for loss
of profits, business interruption, loss of information) arising out of
the use of or inability to use the product, even if ALFTECH has been
advised of the possibility of such damages. ALFTECH does not assume
any responsibility for any errors that may appear in the product
documentation nor any responsibility to support or update the
product.
Limited Warranty
No warranty registration is necessary to obtain warranty on ALFTECH
products. Please save your proof of purchase receipt. If you do not
provide proof of the initial purchase date at the time warranty service
is requested, the manufacturing date of the product will be used to
determine the warranty period.
1. ALFTECH will repair or replace free of charge, any part or parts of the
Product that are defective, but subject to the following conditions:
1.1 Transportation charges on equipment and/or parts submitted for
repair or replacement under this warranty must be borne by the
Purchaser, Distributor, Re-seller and/or End user;
1.2 The warranty period begins on the date of purchase by the first retail
consumer or commercial end user and continues for the period of two
(2) years from that date;
1.3 ALFTECH shall have the sole discretion whether to replace or repair
the Product, and the replacement Product shall be of equivalent or
better specifications, relative to the defective product but need not be
identical.
2. The warranty does not extend to repairs required because of:
2.1 Problems caused by parts or systems that do not form an integral
part of the Products;
2.2 Equipment control, use, maintenance or installations that are not in
accordance with instructions and manuals provided by ALFTECH for
the product;
2.3 the product is repaired, modified or altered, unless such repair,
modification is authorized in writing by ALFTECH; or
2.4 the product serial number is defaced or missing;
2.5 Normal use which has exhausted the life of the product.
3. ALFTECH does not warrant, guarantee, or make any representations as to
the correctness, accuracy, or reliability of the software. ALFTECH does not
warrant that operation of the software and accompanied hardware shall
be uninterrupted or error-free, and no warranty that all defects in the
software product within or without the scope of ALFTECH's applicable
product documentation will be corrected. You are responsible for
determining the appropriateness of using the software and accompanied
hardware, and assume all risks associated with the use of the software,
including but not limited to the risks of program errors, damage to or loss
of data, programs, or equipment, and unavailability or interruption of
operations. Some jurisdictions do not allow for the exclusion or limitation
of implied warranties, so the above limitations or exclusions may not
apply to Licensee.
4. This warranty does not extend to any Batteries if installed in the Product;
5. This warranty does not extend to any equipment, installation, assembly or
system for which the supplier or installer thereof provides a separate
warranty, in which event the End user have to exercise his right and claim
against such a supplier or installer in accordance with such a warranty;
6. This warranty does not extent to the installation, setup and configuration
of the Product, for which the supplier and/or installer are liable in their
respective capacities.
7. The software is provided "as is," without any express or implied warranty
of any kind including warranties of merchantability, noninfringement of
third-party intellectual property, or fitness for any particular purpose. The
entire risk arising out of use or performance of the software remains with
licensee.
Products and Corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are
only used for identification or explanation and to the owners' benefit, without
intent to infringe.
•
Windows is a registered trademark of Microsoft Corporation;
•
IBM is a registered trademark of International Business Machines;
•
Adobe and Acrobat are registered trademarks of Adobe Systems
Incorporated;
•
Corel is a copyright of Corel Corporation.
This product/publication includes images from CorelDRAW
®
X3 which
are protected by the copyright laws of the U.S., Canada and
elsewhere. Used under License.
Specifications and Information contained in this manual are furnished
for information only, and are subject to change at any time without
notice, and should not be construed as a commitment by ALFTECH.
ALFTECH assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual, including the products
and the software described in it.
Copyright © 2009 Alf Electro-Technical Services CC. All rights reserved.
Product Name:
DPT-EN3
the DPT Hardware
DPT-C
ONSOLE
v. 3.3
the DPT Software
Printed:
May, 2009
Product User's Manual