2
AXE
-
PZA
-
GD
-
KIT
ALFRESCO GLASS DOOR RETROFIT KIT FOR AXE
-
PZA PIZZA OVEN.
INSTALLATION INSTRUCTIONS:
WARNING: DO NOT ATTEMPT TO FOLLOW THESE PROCEDURES UNLESS THE UNIT
IS COMPLETELY COOL TO THE TOUCH INSIDE OR OUTSIDE. THE UNIT CAN RE-
MAIN VERY HOT ON THE INSIDE FOR SEVERAL HOURS AFTER COOKING.
STEP 1:
Lift and remove the existing solid stainless
steel doors out of the AXE
-
PZA unit.
This procedure will leave only the hinge
mechanism that is attached to the body of
the pizza oven unit.
STEP 2:
Reach inside the unit and you
will find two wingnuts on each,
left and right, hinge bodies.
The wingnuts are located at a
45°angle, next to the inside
corners at the front of the Piz-
za unit as shown on the right
illustration.
NOTE:
If the unit has been
used several times, the wig-
nuts might be very tight due to
heating and cooling cycles. In
such case, it is recommended
that the wingnuts be removed
while wearing safety or work
gloves.
Once the wingnuts have been removed, the body of the hinge should be able to slide with ease straight
out. Only the threaded studs will remain attached to the body of the AXE
-
PZA oven unit. Repeat this
procedure for the body hinge on the opposite side of the oven unit.
Save the wingnuts as they will be required to install the new hinge assembly.
EXISTING STAINLESS
SOLID DOORS
LIFT AND REMOVE
WINGNUT LOCATIONS
HINGE BODY
VIEW FROM THE INSIDE OF THE UNIT
Содержание AXE-PZA-GD-KIT
Страница 1: ...1 ...
