20
6. aVaIlaBle accessorIes
7. unIt DescrIPtIon
The "stationary busbar bending and hole-punching unit" is a high-performance table unit equipped with
a single-acting hydraulic cylinder (1). With a maximum pressure of 700 bar, a work force of approximately
23 tons is achieved.
A load piston (13) with a universal receptacle in the body (14) of the table unit transfers the work force to the
deployed tools. The centrally mounted laser integrated in the load piston is controlled via an ON/OFF switch (12).
The hydraulic connection (17) and the electrical connection (16) for the electrohydraulic pump are located at
the rear of the unit. The single-pedal safety footoperated switch is connected to the table unit (15) via a 4-pin
socket. An emergency stop switch (6) can stop the hydraulic pump immediately in dangerous
situations to allow the tool to be returned to its initial position. The body (14) is protected with a stable
safety protection hood (11).
A selector switch (5) for setting the desired operating mode (bending/punching) is located above the
emergency stop switch. The unit is also equipped with a Pause push-button (4) and a Stop push-button (3).
The rotary knob (7) allows the height of the body to be adjusted easily in accordance with the height setting
display (8). A side-mounted length stop (10) with read-out scale (9) can be used alternatively or in addition
to the laser for setting up and positioning the workpieces.
5. technIcal sPecIfIcatIons
Tab. 2 Technical specifications
Model No. and designation
03200SET.NG Stationary busbar bending and hole-punching unit
Max. pressure
700 bar (10150 psi)
Max. compressive force
230 kN (52200 lbs)
Max. delivery rate
1,95 l/min (0,5 gal/min)
Permissible materials
Copper, aluminium
Max. busbar width
120 mm (4,72")
Max. busbar height
12 mm (0,47")
Min. hole diameter (punching)
• Ø 6.6 mm for 0... 5 mm material thickness
• Ø 9.0 mm for 0... 6 mm material thickness
• Ø 11 mm for 0... 12 mm material thickness
Max. hole diameter (punching)
Ø 21,5 mm for 0... 12 mm material thickness
min. 50 mm (min. 2")
min. 100 mm (min. 4")
Laser
0.4 mW, Class 1 laser; MTBF>10,000 h
Weight
63 kg (138 lbs)
Permissible hydraulic pump
Electro-hydraulic pump
tab. 3 available accessories
Description
Model no.
Electro-hydraulic pump
03857
Foot-operated switch
03862.NG