Copyright
2005 Alfano, S.A. Tous droits réservés.
5
On the example
(figure 2)
, the Tyrecontrol is ready to record, the first capture in the Set « 08 » before
race
, (« Set » free) while starting with a capture of pressure on the right rear tire.
Figure 3
Figure 4
Figure 5
3)
Apply the mouthpiece of the Tyrecontrol on the valve of the tyre
(figure 3).
4)
Press the central button
to record the measured pressure, then, the point of
capture displayed to the screen moves automatically following the sequence
programmed in the menu SETUP. In the example
(figure 4)
, the device positions
itself on the right front tyre.
5)
Apply the mouthpiece of the Tyrecontrol on the valve of the tyre
(figure 4).
6)
Press the central button
to record the measured pressure and prepare the
Tyrecontrol on the next point of capture
(Figure 5).
7)
Operate this way until the end of the programmed sequence
.
8)
The last capture done, the Tyrecontrol returns automatically to the menu
« RECORD ».
Note : it is possible to program a sequence of capture in the order desired.
(See Menu « SETUP » page 11,
« configuration of the captures sequence »
.
Содержание A-187
Страница 1: ...TYRECONTROL P A 187 User Manual EN...
