Copyright
2005 Alfano, S.A. Tous droits réservés.
2
Introduction
The
TYRECONTROL
«
PRO-P
»
allows you to :
-
Measure the tyres pressures
-
Adjust the tyres pressures (only to decrease)
-
Memorize these data until 99 sets
1 set = until 4 captures of pressures « before
and after
race »
-
With the software "VISUALTYRE" : recover the data recorded for a better analysis and
also bring a help to the configuration of your device
Replacing the batteries
Switch off the device before removing the used batteries to avoid all loss of data recorded. Insert the
two new batteries into the device properly and make sure the terminals "+" and "-" are aligned correctly.
Battery Type : 2 x AA
Important :
It is imperative to use quality batteries manufactured by reputed brands in
order to prevent battery leakage into the device.
A failure caused by the battery acid voids the warranty.
Soft number and serial number of the Tyrecontrol
When you switch on the Tyrecontrol, the screen displays the soft number below in the middle (2
numbers) and the serial number of the device on top (6 numbers : 3 on the left and 3 on the right)
during some seconds.
Caution
The Tyrecontrol is a device of precision and, of this fact, it is
sensitive to the electromagnetic currents coming from the engine ignition.
Keep therefore the Tyrecontrol distant (minimum 50cm) of the engine ignition to avoid false
readings or a device ‘freezing’ when the engine is running.
Содержание A-187
Страница 1: ...TYRECONTROL P A 187 User Manual EN...
