Alfa Network AWAP05O, Руководство пользователя

Страница: 93 / 226

Radio Interface
6-43
6
• b only: Both 802.11b and 802.11g clients can communicate with the access point,
but 802.11g clients can only transfer data at 802.11b standard rates (up to
11 Mbps).
Maximum Station Data Rate – The maximum data rate at which the access
point transmits unicast packets on the wireless interface. The maximum
transmission distance is affected by the data rate. The lower the data rate,
the longer the transmission distance. (Default: 54 Mbps)
For a description of the remaining configuration items, see “Radio Settings
(802.11a)” on page 6-38.
CLI Commands for the 802.11g Wireless Interface – From the global
configuration mode, enter the
interface wireless g command to access the
802.11g radio interface. Set the interface SSID using the ssid command
and, if required, configure a name for the interface using the description
command. You can also use the closed-system command to stop sending
the SSID in beacon messages. Select a radio channel or set selection to Auto using
the
channel command. Set any other parameters as required. To view the current
802.11g radio settings, use the show interface wireless g command.
DUAL OUTDOOR(config)#interface wireless g 7-66
Enter Wireless configuration commands, one per line.
DUAL OUTDOOR(if-wireless g)#description RD-AP#3
7-66
DUAL OUTDOOR(if-wireless g)#ssid r&d 7-67
DUAL OUTDOOR(if-wireless g)#channel auto 7-68
DUAL OUTDOOR(if-wireless a)#closed-system 7-67
DUAL OUTDOOR(if-wireless a)#transmit-power full 7-72
DUAL OUTDOOR(if-wireless g)#speed 6 7-68
DUAL OUTDOOR(if-wireless g)#max-association 32 7-73
DUAL OUTDOOR(if-wireless g)#beacon-interval 150 7-69
DUAL OUTDOOR(if-wireless g)#dtim-period 5 7-70
DUAL OUTDOOR(if-wireless g)#fragmentation-length 512 7-71
DUAL OUTDOOR(if-wireless g)#rts-threshold 256 7-71
DUAL OUTDOOR(if-wireless g)#exit