Alfa Network AWAP05O, Руководство пользователя

Страница: 52 / 226

System Configuration
6-2
6
System Identification
The system information parameters for the wireless bridge can be left at their default
settings. However, modifying these parameters can help you to more easily
distinguish different devices in your network.
The wireless bridge allows the selection of the band to be used for bridge links. The
bridge band can support no wireless clients. Alternatively, bridging can be disabled
and both bands can support access point functions.
Radius Configures the RADIUS server for wireless client authentication 6-6
PPPoE Settings Configures PPPoE on the Ethernet interface for a connection to an ISP 6-8
Authentication Configures 802.1x client authentication and MAC address
authentication
6-11
Filter Control Enables VLAN support and filters traffic matching specific Ethernet
protocol types
6-17
SNMP Controls access to this wireless bridge from management stations
using SNMP, as well as the hosts that will receive trap messages
6-19
Administration Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the wireless
bridge
6-22
System Log Controls logging of error messages; sets the system clock via SNTP
server or manual configuration
6-25
WDS Sets the MAC addresses of other units in the wireless bridge network 6-29
Bridge Sets the time for aging out entries in the bridge MAC address table 6-30
STP Configures Spanning Tree Protocol parameters 6-33
Radio Interface A Configures the IEEE 802.11a interface 6-37
Radio Settings Configures radio signal parameters, such as radio channel,
transmission rate, and beacon settings
6-38
Security Configures data encryption using Wired Equivalent Protection (WEP)
or Wi-Fi Protected Access (WPA)
6-44
Radio Interface G Configures the IEEE 802.11b/g interface 6-42
Radio Settings Configures radio signal parameters, such as radio channel,
transmission rate, and beacon settings
6-42
Security Configures data encryption using Wired Equivalent Protection (WEP)
or Wi-Fi Protected Access (WPA)
6-44
Menu Description Page