manualshive.com logo in svg

Alfa Network AFSG-2242, Руководство пользователя

Поделиться
Скачать
Alfa Network AFSG-2242 Скачать руководство пользователя страница 75

 

74

 

the rules change back originally after setting, can immediately use a network. 

 

The mode of Lock and Mapping 

Lock Mode :

 

A particular user because change the information of the IP/ MAC /       

Port/ Vid of pc, then will have been keeping on after being blockaded by the switch       

is blockaded, even if user change initial value to return to originally correct mode,     

the switch still will keep on blockader, unless the net tube personnel gets into the 

interface of the switch management relieves its lockup, that user can recover a 

network on-line.

 

Suggest: The unit usage needing to be controled strictly, this function can make 

automatically revealed in material body. 

Combining the system effect of the conductor defense is better!! 

Mapping Mode :

 

The mode of Mapping: A particular user because change the 

information of the IP/ MAC/ Port/ Vid of pc, then will have been keeping on after being 

blockaded by the switch is blockaded, be user again change initial value to return to 

originally correct mode, the switch will automatically let the user recover a network 

on-line.

 

 

 

NOTE :   

1.

 

This function is habitually different because of pc usage, needing to be waited for 

then will recover an on-line for several minutes. Suggest that you invite a computer 

while wanting to accelerate the status of the instauration on-line the user reboot 

the computer, Can immediately immediately recover an on-line status, the 

above-mentioned status handles capability as usual for the switch chip. 

2. Start this item function and can't combine conductor to guard against system 

function. 

3. This unit function is an in common use function and remind after changing any 

setting, you must remember. Store your latest initial value. 

           

Содержание AFSG-2242



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды