Alfa Network AFSG-2242, Руководство пользователя

Страница: 123 / 154

122
3.2 Port Commands Set
Netstar Commands Level Description Example
interface fastEthernet
[Portid]
G Choose the port for
modification. switch(config)#interface fastEthernet 2
duplex
[full | half]
I Use the duplex
configuration command to
specify the duplex mode
of operation for Fast
Ethernet. switch(config)#interface fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I Use the speed
configuration command to
specify the speed mode of
operation for Fast
Ethernet., the speed can’t
be set to 1000 if the port
isn’t a giga port.
switch(config)#interface fastEthernet 2
switch(config-if)#speed 100
flowcontrol mode
[Symmetric|Asymmetric]
I Use the flowcontrol
configuration command on
Ethernet ports to control
traffic rates during
congestion.
switch(config)#interface fastEthernet 2
switch(config-if)#flowcontrol mode
Asymmetric
no flowcontrol I Disable flow control of
interface. switch(config-if)#no flowcontrol
security enable I Enable security of
interface. switch(config)#interface fastEthernet 2
switch(config-if)#security enable
no security I Disable security of
interface. switch(config)#interface fastEthernet 2
switch(config-if)#no security
bandwidth in
[Value]
I Set interface input
bandwidth. Rate Range is
from 100 kbps to 102400
kbps or to 256000 kbps
for giga ports,
and zero means no limit. switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth in 100