Alfa Network AFSG-2242, Руководство пользователя

Страница: 45 / 154

44
3.
LACP: If enable, the group is LACP static trunk group. If disable, the group is
local static trunk group. All ports support LACP dynamic trunk group. If
connecting to the device that also supports LACP, the LACP dynamic trunk
group will be created automatically.
4.
Work ports: allow max four ports can be aggregated at the same time. With
LACP static trunk group, the exceed ports are standby and can be aggregated
if work ports fail. If it is local static trunk group, the number of ports must be
the same as the group member ports.
5.
Select the ports to join the trunk group. Allow max four ports can be
aggregated at the same time. Click “Add” button to add the port. To remove
unwanted ports, select the port and click “Remove” button.
6.
If LACP enable, you can configure LACP Active/Passive status in each ports
on State Activity page.
7.
Click ”Apply”.
8.
Use “Delete” button to delete Trunk Group. Select the Group ID and click
“Delete” button.
[NOTE]:
1. A link having either two active LACP ports or one active port can perform
dynamic LACP trunk.
2. A link has two passive LACP ports will not perform dynamic LACP trunk
because both ports are waiting for and LACP protocol packet from the
opposite device.
3. If you are active LACP’s actor, after you have selected trunk port, the
active status will be created automatically.