Alfa Laval Toftejorg SaniJet 25, Инструкция по эксплуатации

Страница: 27 / 90

Instruction Manual, Alfa Laval Toftejorg SaniJet 25
Standard machines, machines delivered with Q-Doc and/or ATEX certification, Dir. 94/9/EC
IM-TE91A760_EN12 Page 25
Preventive Maintenance Guidelines
Preventive Maintenance Guidelines
Following the Alfa Laval Preventive Maintenance Guidelines and using the Alfa Laval Service Kits
ensures the availability of your equipment at all times and enables you to plan your operating budget
and your downtime. The risk of unscheduled breakdowns due to component failure is virtually
eliminated and in the long term your operating costs are reduced.
Alfa Laval Tank Cleaning Equipment Service Kits contain all you need. They comprise genuine Alfa
Laval spare parts, manufactured to the original specifications.
The following recommended preventive maintenance program is based on tank cleaning machines
working in average conditions. However, a tank cleaning machine, exposed to heavy soiling and
recirculation CIP liquid containing abrasives and/or particulates, needs more frequent attention than
one exposed to light/no soiling and recirculation with ordinary CIP liquid. Alfa Laval Tank Cleaning
Equipment recommends you to adjust the maintenance program to suit the cleaning task in hand.
Contact your local Alfa Laval sales office for discussion.
Service and Repair of ATEX approved machines
In order to ensure compliance with the ATEX regulations for service and repair in accordance with EN
60079-19, all service and repair of ATEX approved machines should be performed by Alfa Laval Tank
Equipment, Kolding, Denmark, or Alfa Laval service centre approved by ALTEQ.
Warning: ATEX requirements regarding repair of ATEX approved machines according to EN
60079-19.
A tag with the following labelling information must be attached to the machine:
- Repair symbol R
- Alfa Laval logo and address
- Repair number
- Date of repair
- Machine serial number
The tag must be laminated and attached to the machine using a cable tie.
If a customer wishes to carry out service or repair himself, it is the responsibility of the repair shop to
ensure that the ATEX requirements are met in any way possible. After performing service or repair, the
repair shop thus carries the full responsibility for the ATEX approval of the machine.
Note: Handle the SaniJet 25 with care. Take proper action to protect surfaces from being damaged.
Always use only proper tools and the SaniJet 25 standard tool kit. Never use force, hammer or pry
components together or apart. Always perform all assembly/disassembly steps in the order described
in this manual.
Clean all surfaces prior to assembling. Especially take care of the mating surfaces. Work in a clear
well-lighted work area.