Alfa Laval Toftejorg MultiJet 25, Инструкция по эксплуатации

Страница: 6 / 32

General Description
(continued)
Apart from the main flow flushing the gear and the
Hub, and thereafter forming the jets through the
Nozzles, fluid is flushed through all internal areas,
through bevel gear, Ball bearings and gabs
between moving parts and is finally also used for
cleaning of the outside surfaces of the machine.
The areas behind the Screws on the Cone are
cleaned through small spray holes behind the
Screws. In the bottom of the Body, the machine is
equipped with a hole to ensure self-draining. This
self-draining is only ensured, if the machine is
installed in upright position.
Standard Configurations
Connection Nozzles (mm) Article No.
1" BSP, Female
4 x ø3,9
4 x ø4,6
4 x ø5,5 TE20G100
TE20G102
TE20G104
1" NPT, Female
4 x ø3,9
4 x ø4,6
4 x ø5,5 TE20G120
TE20G122
TE20G124
Standard Options
Connection Nozzles (mm) PEEK Impeller Article No.
1" BSP, Female
4 x ø3,9
4 x ø4,6
4 x ø5,5 TE20G595
TE20G596
TE20G597 TE20G100-02
TE20G102-02
TE20G104-02
1" NPT, Female
4 x ø3,9
4 x ø4,6
4 x ø5,5 TE20G595
TE20G596
TE20G597 TE20G120-02
TE20G122-02
TE20G124-02
Instruction Manual, Toftejorg MultiJet 25 Page 5
IM-TE91A615-EN1
ï
Return to menu