Alfa Laval TE20B200, Инструкция по эксплуатации

Страница: 40 / 47

Instruction Manual Toftejorg SaniJet 20 Electrically Driven Page 38
IM-TE91A794-EN6
Maintenance
(continued)
Further Dismantling
1. Remove M5 Screws (Pos. 26) and lift off the Motor cover (Pos. 20).
2. Remove M5 Screws (Pos. 1 and 29). Loosen and unscrew with a Hex key.
3. Lift off the Motor flange (Pos. 30).
4. Remove Gasket (Pos. 9) and lift off Inlet housing (Pos. 32).
5. Withdraw Rotor Outer (Pos. 31).
6. Remove Gasket (Pos. 9) from Base unit (Pos. 12).
Further Reassembling
Before reassembly make sure that all parts are clean without deposits or build-up of foreign matter.
1.
Insert Gasket (Pos. 9) in top of Base unit (Pos. 12).
2. Insert the Rotor outer (Pos. 31). Check free rotation.
3. Replace Inlet housing (Pos. 32) on Gasket (Pos. 9) in Base unit (Pos. 12).
4. Mount Gaskets (Pos. 9) into Inlet housing (Pos. 32).
5. Mount the Motor flange (Pos. 30).
6. Mount and tighten Screws (Pos. 1 and 29) with Hex key. Tighten crosswise. Torque: 3-4 Nm.
7. Replace Motor cover (Pos. 20) and mount and tighten Screws (Pos. 26).