Instruction Manual Toftejorg SaniJet 20 Electrically Driven
Page 19
IM-TE91A794-EN6
Installation
(continued)
Installation of Electric Motor
Precautions for Installation
1.
Do not use in a place where there is flammable gas and/or corrosive gas.
2.
When installing the motor into your equipment, ensure that the motor lead wires are fixed and do
not move. In addition, do not apply any pressure to these lead wires.
3.
Motors for use only in equipment of protection class I.
4.
The motor housing must be mounted with a screw and spring washer to the ground point of the
equipment.
5.
Installation must be performed by a qualified installer.
Installation Conditions
Install the motor and capacitor according to the following conditions:
1.
Indoor (the product is designed and manufactured to be mounted in a machine).
2.
Ambient temperature: -10 to +50°C (no freezing).
3.
Ambient humidity: Less than 85% (no condensation).
4.
No explosive, flammable, and/or corrosive gas.
5.
Not exposed to direct sunlight.
6.
Not exposed to dirt.
7.
Not exposed to moisture or oil.
8.
Well ventilated and allows heat radiation.
9.
Does not receive continuous vibration or excessive shock.
10. 1,000 meters or less above seal level.
Warning:
The motor housing must always be grounded and the Motor cover must always be
mounted when the motor is connected to the power line.
Содержание TE20B200
Страница 2: ......
Страница 18: ...Page 16 Instruction Manual Toftejorg SaniJet 20 Electrically Driven IM TE91A794 EN6 Blank page...
Страница 24: ...Instruction Manual Toftejorg SaniJet 20 Electrically Driven Page 22 IM TE91A794 EN6 Blank page...
Страница 28: ...Page 26 Instruction Manual Toftejorg SaniJet 20 Electrically Driven IM TE91A794 EN6 Blank page...
