Alfa Laval LKH Series, Инструкция по эксплуатации

Страница: 32 / 76

5 Maintenance
Read the instructions carefully. The items refer to the parts list and service kits section.
Handle scrap correctly.
: Relates to the shaft seal.
5.4 Assembly of pump/single shaft seal
Step Step Step 1 1 1
1. Remove spring (13).
NOTE! NOTE! NOTE!
Make sure that O-ring (15) has maximum clearance from the
sealing surface.
If change from double mechanical shaft seal to single shaft seal
the shaft needs to be adjusted. see Section 5.7 Adjustment of
shaft (LKH-5) and Section 5.8 Adjustment of shaft (LKH-10 to
-90).
Step Step Step 2 2 2
1. Refit spring (13) on rotating seal ring (14).
2. Fit the spring and the rotating seal ring on drive ring (10).
CAUTION CAUTION CAUTION
Ensure that the driver on the drive ring enters the notch in the
rotating seal ring.
Step Step Step 3 3 3
Fit the complete shaft seal on stub shaft (7).
NOTE! NOTE! NOTE!
Make sure that Connex pin (8) on the stub shaft enters the notch
in drive ring (10).
Step Step Step 4 4 4
1. Fit O-ring (12) on stationary seal ring (11) and lubricate.
2. Screw the stationary seal ring into back plate (25).
CAUTION CAUTION
CAUTION
Only tighten by hand to avoid deforming the stationary seal ring.
(Max. 7 Nm/5 lbf-ft)
*) Use the tool supplied. Left hand thread!
32