Alfa Laval LKH Evap ESE01861-EN4, Инструкция по эксплуатации

Страница: 24 / 48

5 Maintenance
Study the instructions carefully. The items refer to the parts list and service kits section.
Lubricate the rubber seals before fitting them.
: Relates to the shaft seal.
5.5 Assembly of pump/flushed shaft seal
Step 1
Flushed shaft seal :
LKH Evap-10 to -60 use ø63mm tube
LKH Evap-70 to -75 press in lip seal by hand
1. Fit lip seal (43) in seal housing (40).
2. Lubricate O-ring (44) and slide onto the seal housing (40).
3. Fit the seal housing on back plate (25) and tighten screws (41).
Use ø63 mm tube! (LKH Evap 10-60)
3000-0096
Step 2
1. Clean the sealing surfaces with contact cleaner.
2. Fit seal housing (40a) on the back plate (25) and tighten screws
(41).
3000-0089
Step 3
1. Carefully guide back plate (25) onto adaptor (16).
2. Fit washers (21) and nuts (20).
3000-0090
Step 4
1. Carefully guide back plate (25) onto adaptor (16).
2. Fit washers (21) and nits (20).
3000-0092
24
www.sks-online.com
www.sks-webshop.com