Alfa Laval IsoMix External Drive, Инструкция по эксплуатации

Страница: 26 / 50

6 Maintenance
All position numbers and item numbers refer to the drawings shown and specified in chapter 8.1 IMXD without middle section
and 8.2 IMXD with middle section.
Step 3
1. Unscrew the lower drive shaft (21) from the upper drive shaft (9) shaft using NV17 fork key.
4306-0025
4306-0026
NOTE
If middle section is used, repeat step 2 and 3 to remove the middle section up-pipe (56) and middle section drive shaft (57).
Step 4
1. Open swing cone.
2. Lift the spray section out of the swing cone.
4306-0012
1
)
2)
1) Swing cone w. flange
2) Spray section w. nozzles
26