Alfa Laval IsoMix External Drive, Инструкция по эксплуатации

Страница: 11 / 50

4 Installation
All position numbers and item numbers refer to the drawings shown and specified in chapter 8.1 IMXD without middle
section and 8.2 IMXD with middle section.
Step 1
Prior to installation: Weld flange w/o groove DN125 (not part of the machine) onto the swing cone. This is the process
connection between the (IMXD) and the tank.
4306-0010
1)
2)
3)
1) Tank
2) Swing cone
3) Flange w/o groove DN125 -
9612492908
Step 2
1. Unscrew the bolts (29 and 31) that attach the flanges (28 and 32) to the DN125 valve body (25) and the DN80 valve body (19).
2. Weld the flanges (28 and 32) to the piping leading to the DN125 valve body (25) and DN80 valve body (19).
11