Alfa Laval FrontLine WideGap 100, Инструкция по эксплуатации, Страница: 6 / 30

Description
Description
Components
8
3
5
6
2
4
1
7
Main components
1 Frame plate Fixed plate with a various number of portholes for the connection of the piping system.
The carrying and guiding bar are attached to the frame plate.
2 Carrying bar Carries the plate pack and the pressure plate.
3 Plate pack Heat is transferred from one media to the other through the plates. The plate pack
consists of channel plates, end plates, gaskets and in some cases transition plates. The
measurement of the plate pack is the
A dimension, i.e the measurement between frame
plate and pressure plate. Refer to the PHE drawing.
4 Pressure plate Moveable plate that can contain a various number of portholes for the connection of
the piping system.
5 Guiding bar Keeps the channel plates, connection plates and the pressure plate alligned at their
lower end.
6 Support column Supports carrying and guiding bars.
7 Tightening bolts Compress the plate pack between the frame plate and the pressure plate.
The bolts with bearing boxes are identified as tightening bolts.
Remaining bolts are used as locking bolts.
8 Portholes Portholes through the frame plate allow the media to enter into or exit from the heat
exchanger.
Document ID Language Edition
6 Instruction Manual - Plate Heat Exchangers 3490017599 EN 2016-06