Alfa Laval AquaMicro, Инструкция по установке и обслуживанию

Страница: 36 / 60

Alfa Laval Micro
Installation and service instruction
36
CM737-Category 4: Transparent Boiler Parameter 8.2.4
Parameter Para
meter
N:o Factory Default Setting Optional Setting
Display Description Display Description
Category 4 Parameters: Transparent Boiler Parameter Setting Display (press PROGRAM to access this
category) 4)
P_heat
1 0 Proportional band 1K
I_heat 2 1 Integral factor 0.1 / minute
Run time valve 3 15 Time needed to open
or close valve
completely 10 seconds
CM737-Category 5: Fault History 8.2.5
Parameter Para
meter
N:o Factory Default Setting Optional Setting
Display Description Display Description
Category 5 Parameters: Fault History (press PROGRAM to access this category) 5)
In this category the occurred boiler errors can be viewed, beginning with the most recent boiler error.
1)
Only if the setting is allowed by the heating appliance. Standard settings and limits can be set by the heating appliance.
2)
Only available if supported by the heating appliance.
3)
Only available if the outside temperature sensor is mounted.
4)
Category 4 & 5 parameters are only available if supported by the heating appliance. This will depend on the type of boiler
electronics in the heating appliance connected with the CM737.
Notes: Always remember to press the green button to confirm that you want to store the new Installer Set-Up setting.
To exit the Installer Set-Up Mode press the AUTO or MAN button.