Alfa Laval ALP 100, Руководство по эксплуатации

Страница: 56 / 77

5
Check the position of the tensioning element:
the tensioning element has to lie on the
distance sleeve and inner rotor.
Otherwise loosen the screws again and re-
align the tensioning element.
6
If the position is correct, first tighten the
screws of the tensioning element with half the
tightening torque crosswise.
Subsequently tighten them several times
crosswise with the
full tightening torque until
no screw can be turned any further.
NOTE
The screws are only tightened correctly
when they can no longer be turned while
being tightened with the full torque.
7
Press the containment can 038 with the
centring flange 110 onto the pump flange and
tighten the connecting screws 914.6 ,
200007725-1-EN-GB 56
10 Maintenance EN