12/19
ALFA IN a.s. ©
www.alfain.eu
GETTING STARTED TIG
Fig. 5 TIG welding set up
1. Insert the mains plug
A8
into a suitable 1x230 V mains socket.
2. Fit the TIG Torch to the Panel quick connector (-)
A5
.
3. Connect the gas hose of the TIG torch onto Gas outlet connector
A3
.
4. Connect the torch control connector onto the matching connector
A4
.
5. Connect the work lead to Panel quick connector (+)
A2
.
6. Connect the gas hose to the reduction valve on the gas cylinder and on
the Gas inlet connector
A7
on the rear panel.
7. Switch the machine on by the ON/OFF switch
A6
.
8. Press the torch trigger, the solenoid valve will open; set the desired gas
flow (pure argon).
9. Select TIG LA or HF mode by means of switch
3
. The corresponding
LED will light up.
10.
Select 2T (two stroke) or 4T (four stroke) mode by means of switch
9
. The corresponding LED will light up.
11.
Select the method desired DC or AC method by means of the
button
5
. The corresponding LED will light up.
12.
In the welding torch must be installed a corresponding tungsten
