Alesis Studio 24, Справочное руководство

Страница: 47 / 105

Effects and Signal Processing
4 6 S
TUDIO
24 R
EFERENCE
M
ANUAL
Left/Right
Outputs Left Input
Dry Defeat = ON
S
HOULD YOU USE ONE OR TWO INPUTS TO EFFECTS
?
If your effect unit has two inputs, in most cases you only need to
connect from ONE Aux Send to the LEFT (mono) INPUT of the effect
unit, but you will still connect both the LEFT and RIGHT OUTPUTS of
the effect to the Stereo Aux Return.
You may not need to connect anything to the right input of the effect, since many
effect units use it only if the effect is connected directly between an instrument and
an amplifier. In most mixing applications, you will set the effect’s wet/dry balance
all the way to wet. The effect device will generate an artificial stereo output from the
signal input. Check the manual for your effect device for more information.
On the other hand, true dual-channel effects processors (such as the Alesis Wedge
and Q20) should be connected to two different sends to take advantage of the dual
processing capability.
Tip : Using MONITOR 1/2 as effects sends: Note that Mon 1 and 2 may be used as
extra effect sends while mixing by connecting eight jumpers from the DIRECT
OUT to the TAPE IN of each Channel.
Using the Stereo Channels as Effects Returns
Alternatively, you may return effects to Channels 9 - 16. By connecting the stereo
outs from the effect device to the L and R inputs of a stereo Channel, you now have
the ability to “mix” the effect’s level with the fader like you can with the signals on
✪