Alesis PHOTON X 25, Быстрый старт руководство пользователя

Страница: 15 / 100

13
Assigning the AXYZ dome
Press the EDIT PRESET button and turn the VALUE/ENTER knob until
you see X Ctrl , Y Ctrl , or Z Ctrl . For each of these settings, you can press PAGE
RIGHT button and assign a different MIDI CC number to each of the three axis
(left/right, near/far, and up/down). You can send out AXYZ dome data on a
specific channel by pressing
PAGE RIGHT and changing the channel from
Comn to a specific channel from 1 to 16 (see above section for more on this).
Another Way to Assign the Controllers
You can also access and then assign controllers by first pressing EDIT PRESET
and then turning the VALUE/ENTER encoder. The display will cycle through
all of the available controllers.
When you see the controller you want to edit, press
PAGE RIGHT . You can
then assign the controller’s parameters as listed above.
MIDI SEND BUTTON
(Sending Program, Bank, and Reset MIDI commands)
Press MIDI SEND to send MIDI program change, bank change, and reset
commands.
Sending Program Change commands
Press VALUE/ENTER . The display will read Program
Number . Twirl VALUE/ENTER to find the program
change number you want to send. Press VALUE/ENTER
to send the program change message.
Sending Bank Change
and Program Change
commands
Turn VALUE/ENTER one click, so the display reads
P Bank . Press VALUE/ENTER and then
twirl it to set the bank number.
Select your MSB and press VALUE/ENTER. Twirl a
second time to set the LSB number and press
VALUE/ENTER . Finally, twirl again to set the program
number and press VALUE/ENTER to send the program
change.
Sending the MIDI Reset command
Turn VALUE/ENTER two clicks, so the display reads Reset All?
Press
VALUE/ENTER two times to send the reset all command.
About SysEx Transfers:
When performing large SysEx
transfers from Windows to
the Photon, you may need to
increase the buffer size on
your Windows software to
ensure a correct transfer.
Selecting a buffer size equal
to or larger than the SysEx
file virtually assures that the
transfer will occur without
errors.