World leader in metal detection for anti-shoplifting purposes
900-1003114 Alert HyperGuard Quick pager MP10D (English V1)
Page: 6/9
Date:May 31, 2013
3.2 Pager receiver recharging
The battery capacity in the receiver is 2.4V 400mAH NiMH
The receiver can with the battery fully charged operate app. 24 hours.
It is highly recommended to recharge the receiver every time it is not in use, minimum once a day
for at least 10 hours. Normally every night
When the adaptor plug is connected to the receiver the following happens:
If the receiver is ON:
Receiver is set OFF
All LED’s are flashing three times
The
red
LED is flashing every 10 seconds
Info in display: External supply applied
High Batt. charge 10.00
If the receiver is OFF:
Two beeps and a vibration are indicated (if enabled).
The LED’s shows a running light from left starting with blue
All LED’s are flashing three times
The
red
LED is flashing every 10 seconds
Info in display: External supply applied
High Batt. charge 10.00
When the adaptor plug is disconnected from the receiver the following happens:
The receiver is OFF
