Alere 55115 Скачать руководство пользователя страница 26

20

Alere™ Universal Printer User Manual

GUIDANCE AND MANUFACTURER’S DECLARATION  
–ELECTROMAGNETIC IMMUNITY

The device is intended for use in the electromagnetic environment specified below. The 
customer or the user of the device should assure that it is used in such an environment.

Immunity test

IEC 60601 test 
level

Compliance  
level

Electromagnetic environment - 
recommendations

Conducted RF
IEC 61000-4-6

3 Vrms
150 kHz to 80 MHz

3 Vrms

Portable and mobile RF communication 
equipment should be used no closer to 
any part of the device, including cables, 
than recommended separation distance 
calculated from the equation applicable 
to the frequency of the transmitter.

Recommended separation distances

d = 1.2 

P

d = 1.2 

P

 80 MHz to 800 MHz

d = 2.3 

P

 800 MHz to 2.5 GHz

where 

P

 is the maximum output power 

of the transmitter in watts (W) according 
to the transmitter manufacturer and 

d

 is 

the recommended separation distance in 
meters (m).
Field strengths from fixed RF 
transmitters, as determined by an 
electromagnetic site survey

 a

 should be 

less than the compliance level in each 
frequency range

 b

.

Interference may occur in the vicinity of 
equipment marked with the following 
symbol:

Radiated RF
IEC 61000-4-3

3 V/m
80 MHz to 2.5 GHz

3 V/m

NOTE 1 At 80 MHz and at 800 MHz ,the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by 
absorption and reflection from structures, objects and people.

a

 Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones 

and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be 
predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF 
transmitters, an electromagnetic site survey should be considered. If the measured field strength 
in the location in which the device is used exceeds the applicable RF compliance level above, the 
device should be observed to verify normal operation. If abnormal performance is observed, additional 
measures may be necessary, such as re-orienting or relocating the device.

b

 Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 1 V/m.

Содержание 55115

































Отзывы: