Alere 55115, Руководство пользователя

Страница: 13 / 32

7 Alere™ Universal Printer User Manual
3. Printer Adjustment
3.1 Adjustment of Parameters
3.1.1 Adjustment and Adjustment Range
Adjustment object Setting range Remark
Print darkness 00—90
Set the print darkness to a lower grade as
long as the print quality is acceptable. This
will extend the print head’s durability.
Darkness difference
of label paper and
continuous paper
20—40
Set the darkness of label paper to be higher
than that of continuous paper. Default value
is 30.
Table 3.1.1
4. Routine Maintenance
Clean the print head, roller and sensor according to the following steps.
4.1 Cleaning the Print Head
If the following cases occur, the print head should be cleaned:
• Printout is not clear.
• Paper feeds and retracts with excessive noise.
• Debris on the print head.
The following steps are for print head cleaning:
1. Turn off the power and open the top cover.
2. Wait for the print head to cool down completely.
3. Wipe off dust or particles on the surface of the print head with a soft cotton cloth
dampened with 70% isopropyl alcohol. (It should not be dripping.)
4. Wait for 5 to 10 minutes until the alcohol evaporates completely. Press down the
print head module and close the top cover.
Caution:
Do not touch the print head during printing and just after operation. It is a thermal element
and can reach a high temperature. Contact with the print head can cause a minor burn.
Important:
Do not touch the print head. It is an ESD-sensitive device. Contact with the print head
may cause damage.