background image

Visit our website at  

www.alemlube.com.au

 or 

www.alemlube.co.nz

NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155

QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224

VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266

WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095

SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011

NZ
TEL: (09) 447 1007
FAX: (09) 447 1008

7

20V Lithium-ion Cordless Grease Gun 450g

OWNER’S TECHNICAL MANUAL

630A

PRESSURE RELIEF VALVE

The safety valve (18) is set at the factory to relieve the pressure if it exceeds 500 bar (7250 psi). Grease leakage through 

 

the valve indicates that this pressure has been reached due to a clogged fitting at the lubrication point. If this is the case, 

 

check the line for the problem.

SHOULDER STRAP

The grease gun is supplied with a shoulder strap for easy transport. Attach the strap supplied to the strap mounts 6a and 6b. 

Adjust the strap length to your needs.

NON-RETURN VALVE CLEANING 

Dirt or particles may cause a failure of the grease dispenser. If the gun is properly primed and grease delivery problems persist, 
perform the following cleaning procedure:

1.

    Unscrew the safety valve.

2.

    Remove the spring and ball.

3.

    Clean the ball and valve seat.

4.

    Reassemble the ball and spring and tighten the safety valve.

SPECIFICATIONS

Voltage

20V

Maximum working pressure 

limited by safety valve

7250psi (500bar)

Flow

100g/min (“L” mode)  

160g/min (“H” mode)

Grease type

Up to NLGI-2

Grease capacity

500g (bulk) 450g (cartridge)

Sound pressure level LpA

68 dB (A), K = 3 dB (A)

Sound pressure level LwA

79 dB (A), K = 5 dB (A)

Vibration

aR < 2,5 m/s

2

, Uncertainly K = 1,5 m/s

2

Functions

Battery level, grease cartridge level, 

grease meter estimation, unit change  
(g/oz), blocked lube point alarm,  

LED light

Battery

Li-Ion 2.0/4.0 Ah

Battery charger

220V-240 VAC

Charging time

70-90min (2.0 Ah)

Hose length

110cm (43")

Weight

3kg / 6.6lb (with tube and 2Ah battery)

1

  

NLGI-2 grease is used with a back pressure of 10bar that simulates passage 
through a lubricator.

Содержание 630A









Отзывы: