Initialize All Option
the
Initialize All
option initializes all parts of the system. this is the option to use for the first initialization.
Initialize Changes Option
the
Initialize Changes
option initializes only the changes made since the last initialization.
After clicking the appropriate button, you will be reminded that everything currently on the keypads will be erased. Click
yes
to continue or
No
to go back. the initialization process may take several minutes. Upon completion, a
Request Completed
screen displays.
After the system is initialized, if changes are made to the system configuration it will be necessary to initialize those changes
before the system can be used. you will not be allowed to make changes to the system if there are pending work orders.
to initialize only the changes, click the
Initialize
Changes
button. Any items that are highlighted
in red did not initialize properly and it will be
necessary to determine what is wrong.
on the right-hand side is the log of all Master
Keypad communications during an initialization
or communications test. to clear this log, click the
Clear Log
button.
SER RFC-PLUS
Fluid Management System
Page 51
Revision (09-13)
Alemite LLC