Creating a New Fluid
11. If the luid you entered during the
Add Tank
procedure was not in the drop-
down list, click
yes
if you want to create a new luid.
the new fluid will now appear in the
Fluid Type
drop-down list.
After you set up a tank and fluid(s), the software
displays graphical representation of the tank
level, including:
•
the percentage of fluid remaining in the tank.
•
the tank information that was entered in the
previous step.
to change the information, click on
Edit
.
to add a new tank, click on
Add Tank
and repeat the process explained in
“Setting Up tanks and Fluids” on page 43.
to track when fluid is added to the tank, click on
Fluid delivery
.
you can edit the amount of fluid added and the units in which it was added
(gallons, liters, pints, and quarts).
After entering the information, click
Save
to save your changes.
you will be asked to verify your changes.
When the verification screen appears, click
OK
.
Fluid Management System
Page 44
Alemite LLC
Revision (09-13)
SER RFC-PLUS