6
Positioning tips
•
When using the unit as a baby monitor: position the camera unit at a minimum distance of
2 metres from your baby and make sure that the power cable is safely tucked away.
•
The temperature sensor projects out from the back of the camera unit. Make sure that the
sensor is hanging freely, is not in direct sunlight and is not heated by light bulbs.
•
To ensure an optimum range, it is best to position the camera unit as high as possible,
away from large metal surfaces.
•
The camera is not waterproof and is therefore only suitable for indoor use. If used out-
doors, the camera unit must be protected from moisture and sand.
3.2 MONITOR
UNIT:
Power supply:
The monitor unit may be powered directly by the supplied rechargeable battery or via the sup-
plied mains adapter with the small plug. As soon as you connect the mains adapter, the battery
will be charged, so that you can also use the monitor unit in a mobile manner.
Battery:
1.
Open the battery compartment of the monitor unit by sliding off the battery cover on the
back of the monitor unit.
2.
Insert the supplied batteries in the battery compartment in such a way that the metal con-
tacts of the battery come into contact with the terminals of the monitor unit, and push the
battery downwards slightly until it clicks into place.
3.
Slide the battery cover back on to the monitor unit.
Only use the supplied Li-Polymer battery (3.7V, 950mAh).
Mains adapter:
1.
Connect the 6V mains adapter with the small plug to the 6V DC jack on the right-hand
side of the camera unit.
2.
Plug the mains adapter into a 230V socket.