10
5 ECO
MODE
5.1 OPERATION:
If ECO mode is disabled, there is a continuous connection between the camera unit and the
monitor unit, and you have continuous video. The audio is only transmitted if the sound level
you set under ‘Sensitivity’ is exceeded.
If you enable ECO Mode, both the camera unit and the monitor unit go into sleep mode, and
there is NO connection. As soon as the camera unit detects a sound that exceeds the set sen-
sitivity level, the camera unit is switched on and establishes a connection with the monitor unit.
Both video and audio are now transmitted. A few seconds after the sound near the camera unit
stops, the message ‘Eco Mode activated’ appears and the system returns to sleep mode. The
screen now goes black again.
Please note that once the set goes into sleep mode, the connection indicator light fl ashes rap-
idly to indicate that there is no connection. In this case, this is not a warning, but a confi rmation
that the system is in the idle state.
5.2
SWITCHING ECO MODE ON/OFF:
1. press
the
M
button
2. use
or to scroll to
ECO MODE
3. press
the
M
button
4. use
or to switch this function on or off
5. press
the
M
button to confi rm your choice
6. press
to close the menu
as soon as you switch ECO mode on, the
lights up
5.3 FORCED
VIEWING:
To force the system to allow you to view the room (or, for example, to check the proper function-
ing of the set), you can switch the camera unit on from the monitor unit:
1. press
the
button
2.
the message ‘Eco Mode activated’ appears on screen
3. press
the
button again to activate the camera unit
4.
after around 10 seconds the camera unit switches itself off again
5.4
OUT OF RANGE INDICATION WITH ECO MODE ON:
When the units are in sleep mode, the ‘No link’ message in the display is disabled (the con-
nection indicator light does, however, fl ash rapidly). If the connection is abruptly cut off at times
when there is a connection, the ‘No link’ message appears in the display and, if set, you will
hear the range alarm.