Alecto DBX-62, Руководство пользователя, Страница: 52 / 56

52
5.6 ALARM TONE:
You can set the unit to emit a clear alarm tone when temperature limits are
exceeded, when the battery is low or when the baby unit is out of range. You
can turn this function on or off as follows:
1. briefly press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option ALARM
TONE
4. briefly press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briefly press the button to confirm you selection and to leave the
menu
• will appear in the display when the alarm tone is switched off
• this setting only turns the alarm tone on or off; the alarm itself is not
changed
• when the alarm tone sounds, you can turn it off by briefly pressing the
button
• this does not turn off the feeding time alarm
5.7 VIBRATION FUNCTION:
If you’re carrying the parent unit with you in a noisy room (e.g. while vacuum
cleaning) or you don’t want sounds from the parent unit bothering other
people and you have set the volume to 0, you can switch on the vibration
function:
1. briefly press the button to activate the touch-
screen
2. press and hold the
M
button for 3 seconds to open
the menu
3. use the and buttons to select the option
VIBRATION FUNCTION
4. briefly press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briefly press the button to confirm you selection and to leave the
menu
• will appear in the display when the vibration function is switched on
6 EXPANSION
The DBX-62 is capable of registering up to 4 baby units. This way you
can monitor 4 babies and because you can assign an individual name to
each unit, you can directly determine which child is crying. Additionally,
for each baby unit you can set the talk-back function, feeding timer, room
temperature, lullabies and night light.
6.1 CODING SWITCH:
In the battery compartment you’ll find a coding switch with 4
positions corresponding with baby units 1, 2, 3 and 4. Make
sure to set an individual code for each baby unit.
6.2 REGISTERING:
Upon expanding, you must register (re-register) ALL baby units,
also the baby units that were already registered.
Preparation:
Both the parent unit and baby unit must be switched off (parent unit: briefly
press and hold the button until the display is completely blank, baby unit:
slide the power switch to the OFF position), but the power supply (adaptor
or batteries) must be connected).
1. press and hold the TALK button on the rear of the parent unit
2. now press and hold the button for approximately 3 seconds until the
parent unit turns on and P/PAIRING appears in the display with the P
flashing. Now release both buttons
3. press and hold the + button on the baby unit
4. now slide the power switch to the ON position, the red light will turn
on, and release the + button
5. briefly press the button, the display of the parent unit will show
‘PAIRING BABY X (*) OK and you’ll hear 2 beep tones from the baby
unit you just registered
6. repeat instructions 3, 4 and 5 for the other baby units
7. finally, turn the parent unit and all baby units off and back on
8. the registration is now complete
*: X = 1-4, corresponding to the position of the coding switch