Alecto DBX-62, Руководство пользователя, Страница: 49 / 56

49
4.6 LULLABIES:
The DBX-62 is pre-programmed with 6 different lullabies and sounds that
you can set via the parent unit. After selecting your desired sound, it will be
played for up to 15 minutes.
1. briefly press the button to activate the touch-screen
2. press and hold the button for 1 second to start
playback
3. you can use the and buttons to select a different
song or sound
• playback will stop automatically after 15 minutes or you
can repeat instructions 1 and 2 above to stop playback
earlier
• use the + and – buttons on the baby unit to adjust the
volume
• the sound of the lullabies can be heard at the parent unit through the
microphone of the baby unit; you can decrease the volume of the parent
unit if this bothers you
4.7 FEEDING TIMER:
The DBX-62 parent unit can emit a signal when it’s time for your baby to be
fed. First you must set how many hours are in between feeding times:
1. briefly press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
FEEDING TIME
4. briefly press the M button
5. use the and buttons to select the time in
between feeding times in increments of half an hour
6. briefly press the button to confirm your selection and to leave the
menu
• you only have to set this time once, but you’ll need to adjust it again
when the time in between feeding times changes or when you prefer to
turn this function off (by selecting ‘off’ in the above step 5)
Switching on the timer.
You can turn on the feeding alarm on the parent unit as follows:
1. briefly press the button to activate the touch-
screen
2. press and hold the
M
button for 3 seconds to open
the menu
3. use the and buttons to select the option START
TIMER
4. briefly press the M button to start the timer and to
leave the menu
• the timer time you have set will now appear in the
display directly underneath the name ‘BABY’ (or the name you
programmed yourself) and will slowly count down
• at 0.00 the unit will emit beep tones for up to 20 seconds while the text
‘FEEDING TIME’ appears in the display
You can now also use the baby unit to turn on the alarm
for the next feeding time:
1. briefly press the button on the baby unit to activate
the alarm for the next feeding time, the unit will emit 2
beep tones.
Attention: only when the baby unit is in communication with the
parent unit you can turn on the alarm for the next feeding time. If you
don’t hear 2 beep tones after pressing the button, the connection between
the baby unit and parent unit is lost. You can now speak into the baby unit to
make it transmit (the red light turns on) and press the button again or
you can activate the feeding time alarm via the parent unit.