ALE TC Series, Руководство оператора

Страница: 16 / 18

Design • Print • Trace
07/07/2011
2.3 To enable the prime switch
you can use the prime switch (see Fig. 1)to prime the print-head instead of using the
controller keyboard. This can be useful if the print-head is too far away from the controller.
To enable the prime switch to work at ANY time:
Press and hold the switch. Wait. LCD will show "ENABLE REMOTE PRIME SWITCH?". Keep
switch pressed and press OK from keypad.
Once the prime switch is activated, you can use it to prime the system or do a test print.
To prime using the prime switch: on the controller keypad press the “prime” key . If
you press the switch once, you will get a “norm” prime.
To print a "test patch" (all nozzles, Fig. 18) press and hold the switch for a longer time.
TC series print-heads Operator Manual 12