ALE TC Series, Руководство оператора

Страница: 13 / 18

Design • Print • Trace
07/07/2011
To prime the system, proceed as follows :
●
Press the “prime” key . It leads to the prime menu (Fig. 16).
This menu offers 3 options:
–
Jet : primes the circuit at high pressure
–
Test : prints with all nozzles
–
Norm : primes the circuit at low pressure
●
To ink up the circuit "from dry" the "Jet" prime is used first. On the display the
second line shows:
.Press the arrow left to get a "Jet" prime. The
display now shows .
●
Press . You should hear the pump “load” (the whirring noise slows down when the
pumps fills in with ink) Repeat this operation until ink jets out of the print-engine .
WARNING : The pump pressure in “inking up” mode is maximum and
ink will jet out!!!
●
Prime twice more using the "Jet" function to remove air from the ink circuit.
●
Prime at least once using the "Norm" function. This is done to remove the remaining
air bubbles from the circuit.
●
Carefully wipe excess ink off (Fig. 17). Do not touch the nozzle plate : it is coated
with a special “non wetting coating” which is self cleaning.
TC series print-heads Operator Manual 9
Fig. 16: J-Series prime menu
Fig. 17: !! Carefully and gently !! wipe the excess ink