background image

AFTER SALES SUPPORT

21

 

 

1300 855 831

 

[email protected]

MODEL: HCE2500 PRODUCT CODE: 64124 03/2019

AUS

HCE2500

Before Operation/Operation

Electrical connections 

•  Before you connect the high pressure washer to the power supply make sure that 

the data on the rating plate are identical to the supply voltage. 

•  If you use any extension cables, make sure that they are suitable for outdoor use 

and have large enough wires:

  1 – 10 m: 1.5 mm²

  10-30 m: 2.5 mm² 

•  Insert the power plug on the power cable into the socket outlet.

IX. Operation

Warning! Be prepared for the recoil force of the emitted water jet! Ensure 

that you are standing firmly and that you are holding the gun (14) securely, 

otherwise you could injure yourself or other people.
Never operate the high pressure washer with a closed water tap. Dry running 

will damage the high pressure washer!

Using the gun (Fig.1/4)

1  Turn on the water tap entirely.
2  Switch on the high pressure washer with the On / off switch (4). Only ever switch 

on the high pressure washer once you have connected all of the water pipes 

and they do not leak. The motor switches on until the required pressure has 

built up. After the pressure has built up, the motor switches off.

3  Press the security switch (C) to unlock the gun starting lever (D). The nozzle 

operates by pressure and the motor switches back on.

4  Releasing the gun starting lever (D) causes the high pressure washer to switch 

off. The system remains pressurised.

5  After using  the high pressure washer press the security switch (C) to lock the 

gun starting lever.

Usage of the accessories (Fig.4)

Foam sprayer (10): Fill the foam sprayer (10) with detergent. The width of the beam 

can be adjusted by turning the nozzle (F). By turning the knob (E), the foam volume 

can be adjusted.
Variable nozzle (15): This accessory is intended for ordinary cleaning works. The 

water jet can be adjusted by turning the variable nozzle (15).

Содержание WORKZONE HCE2500























Отзывы: