AFTER SALES SUPPORT
USA
1 855 754 8297
Preparing the base unit for use
USA
20
− When installing on a wall, ensure that no electric
cables, gas or water pipes are buried beneath the
wall surface before drilling any holes.
− The maximum distance between the base unit and
radio sensor should not be greater than 100 m (direct
visible distance). Building materials, such as concrete
walls, may reduce or prevent signal reception
between the base unit and radio sensor.
− Do not place the base unit and radio sensor on the
floor. This limits the transmission range.
− Electronic devices such as televisions and computers
can disrupt the signal reception.
− At low temperature during winter, the performance
of the radio sensor batteries may fall significantly.
This reduces the transmission range.
1. Mount the hanging bracket
26
on a wall using the
hanging or screw hole (nail or screw not provided).
2. Attach the radio sensor
17
to the hanging bracket
(see
Fig. C
).
Preparing the base unit for use
Powering the base unit
Power supply
The base unit can be powered by batteries
or an alternating current (AC) power supply
using the power adaptor.
