ALDI guarantees that our exclusive brand products are developed to
our stringent quality specifications. If you are not entirely satisfied with
this product, please return it to the nearest ALDI store within 60 days
from the date of purchase, for a full refund or replacement, or take
advantage of our after sales support by calling the supplier’s Customer
Service Hotline.
Pack contents/parts
SPLIT⁄RESET button
MODE button
START⁄STOP button
Neckstrap
Battery compartment screw, 5×
Battery compartment
General information
Reading and storing the user manual
This user manual accompanies this stop watch. It contains
important information on handling the product.
Before using the stop watch, read the user manual carefully.
This particularly applies to the safety notes. Failure to heed this user
manual may result in severe injury or damage to the stop watch.
Store the user manual for future use. If you pass the stop watch on to
third parties, please be absolutely sure to include this user manual.
This user manual can also be downloaded from our website:
http://www.produktservice.info (EAN-Code 26288888).
Explanation of symbols
The following symbols and signal words are used in this user manual,
on the stop watch or on the packaging.
This symbol/signal word designates a hazard with moderate
degree of risk which may lead to death or severe injury if not avoided.
This signal word warns against potential damages to property.
This symbol provides you with useful additional
information on handling and use.
Safety
Proper use
The stop watch is designed only as a chronometer. It is only intended
for private use and not suitable for commercial purposes.
Only use the stop watch as described in this user manual. Any other
use is considered improper and may result in damage to property. The
manufacturer or vendor accepts no liability for damage caused by
improper or incorrect use.
Safety notes
CELL BATTERY
Danger of suffocation!
The stop watch contains a battery and small
parts. While playing, children could swallow
batteries, small parts, or package wrappings
and choke.
-
Keep batteries out of reach of children. Swallowing
may lead to serious injury or death in as little as 2
hours due to internal burns. If swallowed, go straight
to a hospital emergency room.
-
Dispose of used batteries immediately.
-
Keep batteries, small parts and package wrappings
away from infants/small children.
-
Keep the stop watch out of the reach of infants/small
children.
Risks associated with batteries!
The stop watch contains a button cell battery. Handling the
battery improperly poses the risk of explosions or serious
internal injuries.
− Store both new and used button cell batteries so that they are
not accessible to children.
− If you suspect that a button cell battery has been swallowed or
otherwise incorporated, promptly go to a hospital emergency
room. Do not eat or drink and do not induce vomiting.
(Emergency Telephone Number: 000 and Poisons Information
Centre: 13 11 26).
− Only have the battery replaced with the same battery type.
− Do not touch leaky batteries. If you do happen to come into
contact with battery acid, wash the affected area thoroughly
with plenty of clean water. If battery fluid comes into contact
with your eyes or triggers a skin response, you should also seek
medical attention.
− If it is no longer possible to securely close the battery
compartment with the case cover, dispose of the stop watch as
described in the chapter “Disposal”.
− Do not charge or reactivate the batteries, do not disassemble
them, do not dispose of them in fire and do not short circuit
them.
− Remove exhausted or dead batteries from the product.
− Remove batteries from the product before extended storage.
− Dispose of batteries at your collection point.
Danger for children and persons with impaired
physical, sensory or mental capacities (e.g. partially
disabled persons, older persons with reduced
physical and mental capacities) or lack of experience
and knowledge (e.g. older children).
− This stop watch is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the stop
watch by a person responsible for their safety. Children must
not play with the stop watch. Cleaning and user maintenance
may not be performed by children unless they are under
supervision.
− Keep children away from the stop watch.
Risk of damage!
If you use the stop watch improperly or water penetrates the housing,
the stop watch or the battery may be damaged.
− Protect the stop watch from exposure to dirt and dust, extreme
heat and sunlight.
− Keep the stop watch away from open flames (e.g. candles).
− Do not drop the stop watch, do not expose it to shocks and
impacts and do not apply pressure to the stop watch.
− Never immerse the stop watch in water.
− Make sure that no water penetrates the housing.
Checking the stop watch and product contents
1.
Remove the stop watch from the packaging.
2.
Check whether the product contents are complete and if
the stop watch is damaged (see fig. A).
3.
If the delivery is incomplete and/or if parts are damaged,
do not use the stop watch. Contact the manufacturer via
the service address indicated on the warranty certificate.
Operation
Display
Please remove the protective foil from the display. The stop watch is
already switched on.
• SPLIT/RESET button : Press and hold to display alarm time.
• MODE button : Press to display stop watch with 1/100
second precision. Press MODE again three times to get back to
the time mode.
• START/STOP button
: Press and hold to display the date
(day and month).
Acoustic button control
The stop watch has an acoustic button control. Every time a button is
pushed in the stop watch mode a beep signal continue
to sound.
Setting the time and date
Please follow the steps below to set the time and date:
Holding START/STOP
will change the digits rapidly.
1.
While in time mode, press MODE
three times to get
to the setting mode; the seconds will flash.
2.
Press START/STOP
to set the seconds back to 0 (if the
value is 30 or more, the minutes increase by 1).
3.
Press SPLIT/RESET and the minutes will flash. Press
START/STOP to set the minutes.
4.
Press SPLIT/RESET and the hour will flash. Press
START/STOP to set the hour.
5.
Press SPLIT/RESET again to set the date; the day will
flash. Press START/STOP to set the day. Continue in this
pattern to set the month and day of the week.
6.
Press MODE to return to time mode.
When setting the hours, you can choose between 12 and 24-hour
format: an “H,” “A,” or “P” will appear to the right of the minutes field.
Advance the hours
until you reach the desired format.
H = 24-hour format;
A/P = 12-hour format.
Setting the alarm time
Please follow the steps below to set the alarm time:
1.
While in time mode: press MODE twice to get to the
alarm setting mode. The alarm hour will flash.
2.
Press START/STOP to set the hour. This will also
automatically enable the alarm. The alarm symbol appears on
the display.
3.
Press SPLIT/RESET and the alarm minutes will flash. Press
START/STOP to set the minutes.
4.
Press MODE to return to time mode.
5.
Hold SPLIT/RESET and press START/STOP to turn the alarm off
(alarm symbol disappears).
6.
Hold SPLIT/RESET and press START/STOP again to turn the
alarm on (alarm symbol appears).
When the alarm rings, press SPLIT/RESET to turn it off or press
START/STOP to activate the snooze function (alarm will ring again after
5 minutes). The alarm remains active for the next day.
Activating hourly chime
Please follow the steps below to activate the hourly chime:
1.
In time mode hold SPLIT/RESET and press MODE . The
hourly chime is now on (all weekday strokes appear).
2.
Hold SPLIT/RESET and press MODE again to turn off the
hourly chime (all weekday strokes disappear).
