General information
A4
Laminator
7
www.monolith-support.com
AFTER SALES SUPPORT
GB
IRE
00 800 79 333 900
IRE
GB
General information
Reading and storing the user manual
This user manual accompanies this A4 laminator. It contains important
information on start-up and handling.
For improved readability, the A4 laminator will be referred to only as the
“laminator” below.
Before using the laminator, read the user manual carefully. This particularly applies for
the safety notes. Failure to heed this user manual may result in severe injury or dam-
age to the laminator.
The user manual is based on the standards and rules in force in the European Union.
When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. Make sure to include this user manual when
passing the laminator on to third parties.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the lamina-
tor or on the packaging.
WARNING!
This signal symbol/word designates a hazard with
moderate degree of risk which may lead to death or
severe injury if not avoided.
NOTICE!
This signal symbol/word warns against potential
damages to property.
This symbol provides you with useful additional information
regarding operation or handling.
Declaration of Conformity (see chapter “Declaration of Conformity”):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
The certified safety seal (GS mark) certifies that a product meets
the requirements of the German Product Safety Act (ProdSG). The
GS mark indicates that the safety and health of the user will not
be jeopardised providing the product is used properly, but also in
case of foreseeable misuse. This is a voluntary safety mark issued
by TÜV Rheinland.
