14
A4
Laminator
www.monolith-support.com
AFTER SALES SUPPORT
GB
IRE
00 800 79 333 900
GB
IRE
Operation
Laminating
1. Move the ON/OFF switch
4
to “
ON” (―).
The ready indicator will turn from dark blue to red within the next 1 ½–2 minutes.
2. Once the ready indicator
1
is red, place the document between the two sides of
the laminating pouch
6
.
Make sure that the document is flush with and aligned as close as possible to the
sealed edge of the laminating pouch.
3. Insert the laminating pouch so that it is centred and with the closed-edge first into
the laminating pouch infeed slot
2
on the back of the laminator.
The heating rollers will automatically pull the laminating pouch in and move it to
the laminating pouch output slot
5
on the front of the laminator. Don’t use force
to pull out the laminating pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
• If necessary, you can cut off excessive material after it has cooled
off.
• Repeat the process if the laminating pouch has not adequately
adhered to the document.
5. Move the ON/OFF switch to “
OFF” (
AAAAA
) to switch the laminator off.
Removing a jammed laminating pouch
The laminator is equipped with an antiblocking system. If the laminating pouch was
not inserted straight or it becomes jammed in the laminator, proceed as follows:
1. Move the ABS switch
7
towards the laminating pouch infeed slot
2
and hold it
down.
2. Pull the laminating pouch
6
out of the laminator.
It is recommended you pull the laminating pouch out in the direction of
its larger end.
You can place the document in a new laminating pouch and laminate it again.