Operation
13
Operation
WARNING!
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the
laminating pouch infeed slot, immediately disconnect the
mains plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may lead to damage to the
laminator or documents.
− Do not in any case laminate documents with a treated surface
(e.g. fax or thermopaper, Polaroid pictures etc.) and papers
with surfaces that may be altered through heat (tickets, ultra-
sonic scans etc.).
− Only use one laminating pouch per lamination, as laminating
pouches may stick tightly together.
− Do not leave any laminating pouches in or next to the
laminator after lamination.
When using the laminator, a slight odour may be produced. Ensure
there is sufficient ventilation in the room, e.g. by opening windows.
Laminating
1. Move the ON / OFF switch
3
to “
ON
” (―) (see
Fig. B
).
The ready indicator
1
will turn from black to red within the next 1 ½–2 minutes.
2. Once the ready indicator is red, place the document between the two sides of a
laminating pouch
6
(not included).
Make sure that the document is flush with and aligned as close as possible to the
sealed edge of the laminating pouch.
3. Insert the laminating pouch so that it is centred and with the closed-edge first
into the laminating pouch infeed slot
2
on the back of the laminator.
